Cisco
Small Business
SPA303 Configuration Utility
 
User Login    basic  |  advanced
 
Voice
 
Call History
 
Personal Directory
   
 

 
System Information
Connection Type:    DHCPCurrent IP:    172.16.2.95
Host Name:    SEP00A2895E1962Domain:    esap.edu.int
Current Netmask:    255.255.255.0Current Gateway:    172.16.2.1
Primary DNS:    172.16.1.157
Secondary DNS:    172.16.1.20 172.16.1.22
 
Reboot History
Reboot Reason 1:    Link Down(09/20/2017 05:28:11)Reboot Reason 2:    Backup IP(01/01/2003 13:00:06)
Reboot Reason 3:    Backup IP(01/01/2003 12:00:00)Reboot Reason 4:    Backup IP(01/01/2003 12:00:00)
Reboot Reason 5:    Backup IP(01/01/2003 16:00:22)
 
Product Information
Product Name:    SPA303Serial Number:    CCQ21122EO6
Software Version:    7.5.2Hardware Version:    1.0.1
MAC Address:    00A2895E1962Client Certificate:    Installed
Customization:    OpenLicenses:    None
 
Phone Status
Current Time:    11/24/2017 19:33:26Elapsed Time:    16 days and 00:37:11
Broadcast Pkts Sent:    40Broadcast Bytes Sent:    3236
Broadcast Pkts Recv:    20019683Broadcast Bytes Recv:    1309741192
Broadcast Pkts Dropped:    0Broadcast Bytes Dropped:    0
RTP Packets Sent:    330364RTP Bytes Sent:    52836296
RTP Packets Recv:    329607RTP Bytes Recv:    52737120
SIP Messages Sent:    24959SIP Bytes Sent:    10639610
SIP Messages Recv:    24954SIP Bytes Recv:    13783701
External IP:    Operational VLAN ID:    N/A
SW Port:    100M Full DuplexPC Port:    10M Full Duplex
 
Ext 1 Status
Registration State:    RegisteredLast Registration At:    11/24/2017 19:15:00
Next Registration In:    1706 sMessage Waiting:    No
Mapped SIP Port:    
 
Ext 2 Status
Registration State:    Not RegisteredLast Registration At:    
Next Registration In:    Message Waiting:    No
Mapped SIP Port:    
 
Ext 3 Status
Registration State:    Not RegisteredLast Registration At:    
Next Registration In:    Message Waiting:    No
Mapped SIP Port:    
 
Line 1 Call 1 Status
Call State:    IdleTone:    None
Encoder:    G711uDecoder:    G711u
Type:    OutboundRemote Hold:    No
Callback:    Peer Name:    
Peer Phone:    4610Duration:    00:02:37
Packets Sent:    4949Packets Recv:    4944
Bytes Sent:    791680Bytes Recv:    791040
Mapped RTP Port:    Media Loopback:    
Decode Latency:    12 msJitter:    0 ms
Round Trip Delay:    Not AvailableEnd System Delay:    0 ms
Packets Lost:    0Packet Error:    0
Loss Rate:    0Discard Rate:    0
Burst Duration:    0 msGap Duration:    0 ms
R Factor:    MOS Listening:    
MOS Conversational:    
 
Line 1 Call 2 Status
Call State:    IdleTone:    None
Encoder:    Decoder:    
Type:    Remote Hold:    
Callback:    Peer Name:    
Peer Phone:    Duration:    
Packets Sent:    Packets Recv:    
Bytes Sent:    Bytes Recv:    
Mapped RTP Port:    Media Loopback:    
Decode Latency:    Jitter:    
Round Trip Delay:    End System Delay:    
Packets Lost:    Packet Error:    
Loss Rate:    Discard Rate:    
Burst Duration:    Gap Duration:    
R Factor:    MOS Listening:    
MOS Conversational:    
 
Line 2 Call 1 Status
Call State:    IdleTone:    None
Encoder:    G711uDecoder:    G711u
Type:    Remote Hold:    
Callback:    Peer Name:    
Peer Phone:    Duration:    
Packets Sent:    0Packets Recv:    0
Bytes Sent:    0Bytes Recv:    0
Mapped RTP Port:    Media Loopback:    
Decode Latency:    0 msJitter:    0 ms
Round Trip Delay:    0 msEnd System Delay:    0 ms
Packets Lost:    0Packet Error:    0
Loss Rate:    0Discard Rate:    0
Burst Duration:    0 msGap Duration:    0 ms
R Factor:    Not AvailableMOS Listening:    Not Available
MOS Conversational:    Not Available
 
Line 2 Call 2 Status
Call State:    IdleTone:    None
Encoder:    Decoder:    
Type:    Remote Hold:    
Callback:    Peer Name:    
Peer Phone:    Duration:    
Packets Sent:    Packets Recv:    
Bytes Sent:    Bytes Recv:    
Mapped RTP Port:    Media Loopback:    
Decode Latency:    Jitter:    
Round Trip Delay:    End System Delay:    
Packets Lost:    Packet Error:    
Loss Rate:    Discard Rate:    
Burst Duration:    Gap Duration:    
R Factor:    MOS Listening:    
MOS Conversational:    
 
Line 3 Call 1 Status
Call State:    IdleTone:    None
Encoder:    Decoder:    
Type:    Remote Hold:    
Callback:    Peer Name:    
Peer Phone:    Duration:    
Packets Sent:    Packets Recv:    
Bytes Sent:    Bytes Recv:    
Mapped RTP Port:    Media Loopback:    
Decode Latency:    Jitter:    
Round Trip Delay:    End System Delay:    
Packets Lost:    Packet Error:    
Loss Rate:    Discard Rate:    
Burst Duration:    Gap Duration:    
R Factor:    MOS Listening:    
MOS Conversational:    
 
Line 3 Call 2 Status
Call State:    IdleTone:    None
Encoder:    Decoder:    
Type:    Remote Hold:    
Callback:    Peer Name:    
Peer Phone:    Duration:    
Packets Sent:    Packets Recv:    
Bytes Sent:    Bytes Recv:    
Mapped RTP Port:    Media Loopback:    
Decode Latency:    Jitter:    
Round Trip Delay:    End System Delay:    
Packets Lost:    Packet Error:    
Loss Rate:    Discard Rate:    
Burst Duration:    Gap Duration:    
R Factor:    MOS Listening:    
MOS Conversational:    
 
Downloaded Ring Tone
Status:    Idle
Ring Tone 1:    Not Installed
Ring Tone 2:    Not Installed
 
Custom CA Status
Custom CA Provisioing Status:    
Custom CA Info:    Not Installed

 
System Configuration
Enable Web Server:     User Password:    
Signaling Protocol:    
 
Internet Connection Type
Connection Type:    
 
Static IP Settings
Static IP:    NetMask:    
Gateway:    
 
Optional Network Configuration
HostName:    Domain:    
Primary DNS:    Secondary DNS:    
DNS Query Mode:    Syslog Server:    
Debug Server:    Debug Level:    

 
Response Status Code Handling
SIT1 RSC:    SIT2 RSC:    
SIT3 RSC:    SIT4 RSC:    
 
RTP Parameters
RTP Port Min:    RTP Port Max:    
 
SDP Payload Types
AVT Dynamic Payload:    G726r16 Dynamic Payload:    
G726r24 Dynamic Payload:    G726r40 Dynamic Payload:    
G729b Dynamic Payload:    
 
Linksys Key System Parameters
Force LAN Codec:    

 
Control Timer Values (sec)
Call Back Expires:    Call Back Retry Intvl:    
 
Vertical Service Activation Codes
Call Return Code:    Blind Transfer Code:    
Call Back Act Code:    Call Back Deact Code:    
Cfwd All Act Code:    Cfwd All Deact Code:    
Cfwd Busy Act Code:    Cfwd Busy Deact Code:    
Cfwd No Ans Act Code:    Cfwd No Ans Deact Code:    
CW Act Code:    CW Deact Code:    
CW Per Call Act Code:    CW Per Call Deact Code:    
Block CID Act Code:    Block CID Deact Code:    
Block CID Per Call Act Code:    Block CID Per Call Deact Code:    
Block ANC Act Code:    Block ANC Deact Code:    
DND Act Code:    DND Deact Code:    
 
Miscellaneous
Set Local Date (mm/dd):    Set Local Time (HH/mm):    
Time Zone:    Time Offset (HH/mm):    
Ignore DHCP Time Offset:    

 
General
Station Name:    Station Display Name:    
Voice Mail Number:    Text Logo:    
BMP Picture Download URL:    
Select Logo:    Select Background Picture:    
Softkey Labels Font:    Screen Saver Enable:    
Screen Saver Wait:    Screen Saver Icon:    
 
Line Key 1
Extension:    Short Name:    
 
Line Key 2
Extension:    Short Name:    
 
Line Key 3
Extension:    Short Name:    
 
Miscellaneous Line Key Settings
Line ID Mapping:    Line Navigation:    
Call Appearance Per Line:    Softkey Navigation Style:    
 
Ring Tone
Ring1:    
Ring2:    
Ring3:    
Ring4:    
Ring5:    
Ring6:    
Ring7:    
Ring8:    
Ring9:    
Ring10:    
Ring11:    
Ring12:    
 
Audio Input Gain (dB)
Handset Input Gain:    Headset Input Gain:    
Speakerphone Input Gain:    Handset Additional Input Gain:    
Headset Additional Input Gain:    Speakerphone Additional Input Gain:    
 
Broadsoft Settings
XSI Host Server:    Directory Name:    
Directory Type:    Directory UserID:    
 
XML Service
XML Directory Service Name:    
XML Directory Service URL:    
XML Application Service Name:    
XML Application Service URL:    
XML User Name:    XML Password:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Proxy:    
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Proxy:    
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
General
Line Enable:     Restrict MWI:    
 
NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
 
SIP Settings
SIP Port:    SIP Debug Option:    
 
Call Feature Settings
Message Waiting:     Default Ring:    
Mailbox ID:    User ID with Domain:    
Auto Ans Page On Active Call:     Feature Key Sync:    
 
Proxy and Registration
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
 
Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    
 
Audio Configuration
Preferred Codec:    Use Pref Codec Only:    
Second Preferred Codec:    Third Preferred Codec:    
Silence Supp Enable:     DTMF Tx Method:    

 
Call Forward
Cfwd Setting:     Cfwd All Dest:    
Cfwd Busy Dest:    Cfwd No Ans Dest:    
Cfwd No Ans Delay:    
 
Speed Dial
Speed Dial 2:    Speed Dial 3:    
Speed Dial 4:    Speed Dial 5:    
Speed Dial 6:    Speed Dial 7:    
Speed Dial 8:    Speed Dial 9:    
 
Supplementary Services
CW Setting:     Block CID Setting:    
Block ANC Setting:     DND Setting:    
Secure Call Setting:     Dial Assistance:    
Auto Answer Page:     Preferred Audio Device:    
Time Format:    Date Format:    
Accept Media Loopback Request:    Media Loopback Mode:    
Media Loopback Type:    Text Message:    
Text Message From 3rd Party:     Alert Tone Off:    
Log Missed Calls for EXT 1:     Log Missed Calls for EXT 2:    
Log Missed Calls for EXT 3:     Shared Line DND Cfwd Enable:    
 
Audio
Ringer Volume:    Speaker Volume:    
Handset Volume:    Headset Volume:    
Speakerphone Enable:    
 
LCD
LCD Contrast: